【软管泵路沿石成型机出厂价】

电机+定整比减速器 <br />
  主要特点：承载能力强，效率高，振动小，噪音低，能耗低，传动方式简单，但由于其速比恒定，所以决定了流量不可调。<br />
   变频电机+变频器
  主要特点：扭矩大，调速精度高，运转平稳，性能稳定，可实现转速的自动调节，确保了流量的任意控制，弥补了无级变速器自动化程度不高的缺陷。缺点是变频器的价格较高。<br />
    液压马达式。                 

软管泵可应用于多用移动泵站的结构 :自吸高度可达到9米，水平自吸可达200米以上，无需灌泵。特别适合于市政下水道系统的污水、污泥抽排。无堵塞、杂质通过能力强。普通的塑料袋、沙石、编织袋、泥浆、毛发等杂物都不会影响泵的使用。采用原轮泵，耐干运行，泵体坚固耐用、寿命长。使用快速连接接头，方便进出口管道的装配。 整车设计紧凑、适应于狭小空间使用。使用便捷拆卸式防雨布、或硬质钢板隔音罩，低噪音设计，符合环保标准要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.

 

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.